 |
| Current divider schematic diagram |
Once again, I show differentmethods of constructing the same circuit: breadboard, terminal strip, and ”free-form.” Experiment with all these construction formats and become familiar with their respective advantages and disadvantages.
Select three resistors from your resistor assortment and measure the resistance of each one with an ohmmeter. Note these resistance values with pen and paper, for reference in your circuit calculations.
Connect the three resistors in parallel to and each other, and with the 6-volt battery, as shown in the illustrations. Measure battery voltage with a voltmeter after the resistors have been connected to it, noting this voltage figure on paper as well. It is advisable to measure battery voltage while its powering the resistor circuit because this voltage may differ slightly from a no-load condition.
 |
| Current divider illustration |
 |
| Current divider illustration 01 |
 |
| Current divider illustration 02 |
0 comments:
Post a Comment